Likely that the browser they were pointed at went missing (executable moved or something), or was crashing at launch, and this is just Windows saying “I can’t find the default you wanted so I am falling back to Edge, otherwise a lot of stuff is going to be broken”.
If you want the search to be flexible like handling things like root stemming (i.e. for matching words that are pluralized etc) you might want to put the text into an Elasticsearch database.
You might run into problems with the field length if these are long documents. A possible solution to that would be an putting each page into its own field inside of the document.
If this is for a non tech user to search, the Kibana interface should be relatively easy for anyone to use.
The biggest question is going to be will the AI be able to run locally or will they use it as an excuse to turn the game into a subscription.
I can see it now… “The game needs to make calls to OpenAI that we have to pay for to generate dialog so we need to charge by the month for the game”
They will finally have an excuse to turn single player games into subscriptions as well.
Using AI in games isn’t about AI coding. Using AI to code games is likely already in almost every studio.
When they say AI in games that means AI artwork, voice lines, environments, etc.
i.e. imagine NPCs that change their voice lines based on recent events like recently completed missions, or your player looks/equipment/etc. With AI you don’t have to pre-record a near infinite amount of voice lines they can be generated on the fly.
It’s not like they want to punish you for paying off your car.
The reality is that a high percentage of the population loads up on more debt after paying off current debts, so the algorithm reflects that. Usually those points come back after a couple of months.
I assume you are powering the dock? Many docks require external power before they will pass video.
Does the screen on the deck shut off or stay active?
If the screen stays active that means that it isn’t detecting an HDMI signal through the dock at all.
If the screen shuts off but you get no video through the receiver, you should try hitting the power button one to shut it off wait a few seconds then turn it back on (while plugged in). Even the official dock has issues getting the deck to switch to the external output but putting the deck to sleep and back on gets it sorted out.
If that still doesn’t do it plug in directly to your TV to narrow down the problem (removes the receiver as a variable). Next try a different HDMI cable, and as a last resort try a different dock. If you know someone else with their own deck you can try theirs to eliminate a hardware failure on your deck.
Slows down then freezes sure sounds like an out of memory situation, so to add to yours here they might actually want less swap. Sometimes you would rather hit the oom killer sooner instead of waiting on swap to fill.
Ideally login via SSH from another machine to figure out what is using the memory (hopefully the system is responsive enough for SSH), and if it is your critical programs causing the problem then you should consider a memory upgrade.
Contrary to a lot of posts that I have seen, I would say ZFS isn’t pointless with a single drive. Even if you can’t repair corruption with a single drive knowing something is corrupt in the first place is even more important (you have backups to restore it from right?).
And a ZFS still has a lot of features that are useful regardless. Like snapshots, compression, reflinks, send/receive, and COW means no concerns about data loss during a crash.
BTRFS can do all of this too and I believe it is better about low memory systems but since you have ZFS on your NAS you unlock a lot of possibilities keeping them the same.
I.e. say you keep your T110ii running with ZFS you can use tools like syncoid to periodically push snapshots from the Optiplex to your T110.
That way your Optiplex can be a workhorse, and your NAS can keep the backup+periodic snapshots of the important data.
I don’t have any experience with TrueNAS in particular but it looks like syncoid works with it. You might need to make sure that pool versions/flags are the same for sending/receive to work.
Alternatively keep that data on an NFS mount. The SSD in the Optiplex would just be for the base OS and wouldn’t have any data that can’t be thrown away. The disadvantage here being your Optiplex now relies on a lot more to keep running (networking + nas must be online all the time).
If you need HA for the VMs you likely need distributed storage for the VMs to run on. No point in building an HA VM solution if it just moves the single point of failure to your NAS.
Personally I like Harvester, but the minimum requirements are probably beyond what your hardware can handle.
Since you are already on TrueNAS Scale have you looked at using TrueNAS Scale on the Optiplex with replication tasks for backups?
Credit unions use the NCUA instead of FDIC. So if they don’t go after that as well there are still some options.
You can use sites like these to randomize your playlist. You can have it randomize the playlist or create a randomized copy if you want to keep the original.
I usually start the playlist, turn on their crappy shuffle to get me to a random position in the randomized playlist, then disable their profitability maximizer shuffle.
Very much agree. BoTW is a good game and definitely worth playing but it isn’t a great game. My biggest gripe with it is that there is clearly a RPG leveling/XP system that they desperately try to hide. They don’t want to be an RPG but it is difficult for an open world game to not use those mechanics.
So once you realize this you ask yourself why am I breaking all of these weapons just to get more weapons when the only outcome is that the enemies get harder. Blood moons are probably just world resets when you go up a level, which also makes higher level enemies appear.
They also very apparently apply this to the rain patterns as well. Right away I went all in on exploring and getting shrines to increase stamina because it sure is handy to be able to climb large cliffs to explore the map. But I didn’t actually do much fighting during that time. Once I had stamina maxed and started just playing and clearly as I leveled up the chances of rain as soon as you approached a cliff side went up considerably making all of that work feel worthless.
The end result was that playing more just meant things got worse, instead of a normal RPG where leveling up meant you gained abilities/stats instead the world just got harder. Sure the weapons got better but once you have the master sword you are always using that first and the harder the enemies get the less effective it is since its stats don’t change.
The game also has some serious balancing issues with those levels. Until you get protective clothing it see a like nearly every enemy does exactly your health minus one heart in damage. Have 8 hearts? Ehh 7 of those don’t matter if you weren’t at 100% health you are dead anyways. Go through shrines to increase those hearts? Doesn’t matter enemies still nearly one shot you every time. Easily rectified if you buy/upgrade armor but if you are a cheap bastard like me and don’t want to spend money on items that might not be useful you end up playing quite a while before you understand that the deck is stacked against you.
Also in general the map is very lifeless, and there is so little variation in enemies. They certainly are limited by the WiiU/Switch so can’t fault them too much on that front.
ToTK fixes a lot of problems compared to BoTW but using the same map feels like it should have been DLC. Everything above/below the map feels like they just told an intern here is your spot go make a change in this area without having to make a change to the old map. And the story line feels very copy+paste from BoTW (go fight the four things in the four corners then go kill the big bad).
Obviously the devices you can make and the increased variation in enemies fixes a lot of the complaints with BoTW, and helps keep you engaged with the game.
ZD has a top tier storyline, but you need to be the type that cares about that to get the most out of it. I suspect most of the folks that don’t like Horizon are the type that don’t bother to listen to the audio files/read the text messages which really fills out the story. Gameplay is good but gets a little repetitive towards the end (once you are grinding thunderjaws for fun on very hard everything else is just too easy). Some enemies are just variations but the variations change how you approach fighting them.
HFW the story isn’t nearly as good (still good but HZ is a high bar), but the variations in enemies and how you have to fight them is much better. If you are trying to get end game weapons the grind is a bit too much. Do yourself a favor and just change to story mode difficulty so you don’t have to waste hours of your time fighting the same enemies. If you just want to explore/fight across a huge beautiful map HFW is great for that.
If you are just looking to repurpose an old device for around the house use and it won’t ever be leaving your home network, then the simplest method is to set a static IP address on the device and leave the default gateway empty. That will prevent it from reaching anything other than the local subnet.
If you have multiple subnets that the device needs to access you will need a proper firewall. Make sure that the device has a DHCP reservation or a static IP and then block outgoing traffic to the WAN from that IP while still allowing traffic to your local subnets.
If it is a phone who knows what that modem might be doing if there isn’t a hardware switch for it. You can’t expect much privacy when that modem is active. But like the other poster mentiond a private DNS server that only has records from your local services would at least prevent apps from reaching out as long as they aren’t smart enough to fall back to an IP address if DNS fails.
A VPN for your phone with firewall rules on your router that prevent your VPN clients from reaching the WAN would hopefully prevent any sort of fallback like that.
If you are accessing your files through dolphin on your Linux device this change has no effect on you. In that case Synology is just sharing files and it doesn’t know or care what kind of files they are.
This change is mostly for people who were using the Synology videos app to stream videos. I assume Plex is much more common on Synology and I don’t believe anything changed with Plex’s h265 support.
If you were using the built in Synology videos app and have objections to Plex give Jellyfin a try. It should handle h265 and doesn’t require a purchase like Plex does to unlock features like mobile apps.
Linux isn’t dropping any codecs and should be able to handle almost any media you throw at it. Codec support depends on what app you are using, and most Linux apps use ffmpeg to do that decoding. As far as I know Debian hasn’t dropped support for h265, but even if they did you could always compile your own ffmpeg libraries with it re-enabled.
How can I most easily search my NAS for files needing the removed codecs
The mediainfo command is one of the easiest ways to do this on the command line. It can tell you what video/audio codecs are used in a file.
With Linux and Synology DSM both dropping codecs, I am considering just taking the storage hit to convert to h.264 or another format. What would you recommend?
To answer this you need to know the least common denominator of supported codecs on everything you want to play back on. If you are only worried about playing this back on your Linux machine with your 1080s then you fully support h265 already and you should not convert anything. Any conversion between codecs is lossy so it is best to leave them as they are or else you will lose quality.
If you have other hardware that can’t support h265, h264 is probably the next best. Almost any hardware in the last 15 years should easily handle h264.
When it comes to thumbnails for a remote filesystem like this are they generated and stored on my PC or will the PC save them to the folder on the NAS where other programs could use them.
Yes they are generated locally, and Dolphin stores them in ~/.cache/thumbnails on your local system.
North Dakota like many states has a renters refund for those with lower incomes which is designed to at least partially offset that. Limits look to be a bit low but every little bit helps.
H2i® models provide heating, even in outdoor temperatures as low as -13° F, producing up to 100% heating capacity at 5° F. These units offer year-round comfort even in extreme climates
Their technical documents show that they are down to about 20% of their usual heat output at that lowest temperature so they need to be sized up accordingly. The reality for most folks in an area cold enough to require these is they have backup heat sources for the coldest days anyways.
I’ve got several full color Hue bulbs that are the most used lights in my house. I haven’t had a single failure in a decade.
I was more than a little annoyed when they decided to stop supporting my original controller for them though.
Gerrymandered districts are more in danger not less. Gerrymandering is about spreading out areas which are easy wins, and instead spreading those votes over multiple districts.
You gain more seats, but you make every race closer.
In any KDE app you can connect with SFTP in the open file dialog. Just type sftp://user@server/path and you can browse/open/edit files the remote server. ssh keys+agent make things a lot easier here obviously.
It might be the least effective especially for those not in swing states, but it certainly isn’t the least important.
And as far as “not a democracy” the NPVIC isn’t that many states away from effectively rendering the problems with the electoral college moot. Certainly a steep uphill battle though.
If voters actually turned out for primaries/elections there would be much better candidates. So your argument becomes “nobody else does it, and because of that the system is broken, and so I won’t do it either”.
It seems like people get caught up in the media hype on the presidential election and forget that some of the most important change needs to start from the bottom up, and a couple of. votes can make a huge difference in State levels, and congressional/senate elections. A president is worthless without a Congress/senate passing laws that actually matter.
Just look at what Minnesota has been able to with voter reform in the last year with their very narrow trifecta. I.e law went into effect this year that allows residents to sign up to automatically receive absentee ballots for every election/primary in their area. A minor improvement, but an important one. Guaranteed that there will be folks that wouldn’t bother to vote on non-presidential elections that will be now.
They also added a “right to be absent from work to vote” which gives Minnesotans the ability to vote without using any sort of vacation/leave time without losing pay. Full list of other rather import changes here
Things like that can snowball into a larger shift at the state level.
The state has no need for you to legitimize them. Even if the system is weighted against you every vote still has power, and the only thing that not voting accomplishes is sending a message that you are okay with the system as it is. There are plenty of politicians out there that want change to happen, and they can’t do it without enough votes behind them.
Same here. I have three models of Zebra printers and they were all pretty much plug and play with Linux.